【product description】

Developed according to the standard GB32086-2015 "Technical requirements and test methods for vertical combustion characteristics of specific types of automotive interior materials", fully meets the technical requirements specified in the national standard GB32086, and is suitable for M3 automotive interior curtains that carry more than 22 passengers /Sun blinds and/or other internal suspension materials are not suitable for city buses with standing passengers.

【Standards compliant】                  

GB 32086-2015 "Technical requirements and test methods for vertical combustion characteristics of specific types of automotive interior materials"

The vertical part of European Union Automotive Technology Directive 95/28//EC "Combustion characteristics of certain types of automotive interior materials"

【technical parameter】

1. Control range: 0.1s-99min99s; timing accuracy 0.1s

2. Specimen holder length * width * height size: 0.17m*0.02m*0.56m

3. Fume hood: Overall dimensions: width 600mm × depth 500mm × height 1000mm (cold-rolled sheet electrostatic spraying outer box), the internal volume of the fume hood is 110 times the volume of the fixed frame

4. Bunsen burner (burner) automatically tilts 30°, (can be selected between two angles of 30° and 45°, can be preset)

5. Test environment wind speed is adjustable, wind speed: 0.1m/s-0.3m/s

6. Temperature measurement in the combustion box: temperature measurement range 0℃～90℃; accuracy 0.1℃ (panel meter display + Kay installed thermocouple in the box)

7. Flame height: 10-100mm continuously adjustable

8. Power supply: 220VAC-15%～220VAC+10% 500W (single-phase three-wire system)

9. Specimen fixture size: the frame is 560 mm high and consists of two parallel rods with a distance of 150 mm. The rod has a fixed needle for fixing the specimen.

10. The gas used by the gas lamp: industrial propane gas, butane gas or liquefied petroleum gas (customer self-prepared)

 configuration list:

Host one

White mercerized cotton thread: the maximum linear density is 50tex (2 rolls)

Steel ruler (one set): the range of the steel ruler is more than 600 mm, and the accuracy is 1 mm

One piece of gas source pipe

One power cord

An optional anemometer (testo; model: 425 thermal anemometer)